ERC 450EP 17.7 Inch Automatic Electric Paper Cutter with Cabinet Base
Looking for a reliable Electric Paper Cutter with a Base Cabinet at an affordable price? The ERC 450EP Automatic Electric Paper Cutter will suit your budget while providing the performance you need for your jobs. The ERC 450EP Electric Paper Cutter is designed and built to cut your media easily and with accuracy to within 0.2 mm. This Paper Cutter has a Cutting Width of 17.7 inches just what you need to cut 12 x 17 Paper Stock. Its Optical Blade Placement Indicator helps and guides you in making precise cuts. The 450EP Electric Paper Cutter will smoothly cut through a stack of Paper up to 1.57 inches thick / in height (about 300 sheets) in a single quick stroke. The motor driven Backstop is controlled through a Digital Display and Input Panel, moves smoothly, extends to the rear edge of the cutting surface, and can be locked in position. Blade to Backstop Depth is 16 inches. Cutting Blade and Electric Paper Clamp alignment allow for a Narrow Cut of 1- 3/8 inches. Work surface on the 450EP Electric Paper Cutter is a 28 x 26 inches. A significant Safety Feature is that Blade Action on the 450EP requires two-hand operation. A useful Base Cabinet with storage is included.
PRODUCT FEATURES: -
Electric Blade, Clamp and Back Gauge Drive
-
Automatic Clamp can be lowered or raised independently from Blade
-
Electric Motor driven Paper Clamp, which allows cuts a small as 1-3/8 inchBr>
-
Safe Two-Handed Operation
-
Transparent Safety Guard
-
Full Backstop Extension
-
Solid Steel Blade Carrier
-
Precise Digitally Controlled Back Stop
-
400 sheet or 1.57 inch cutting capacity.
-
Comes with a Base Cabinet for convenient storage.
- Shipping and handling are additional.
- Shipping Information: Dimensions: 29 x 34 x 25 Inches. Weight 288 lbs
- 110 Voltage is Standard, 220 Voltage is optional.
SPECIFICATIONS:
| Product Width: |
26.38in.. |
| Product Height: |
40.16in. |
| Product Length: |
30.7in. |
| Product Actual / Net Weight: |
253 lbs. | .
| Voltage: |
110 Voltage is Standard, 220 Voltage is optional. |
WARRANTY FOR ELCTRIC CUTERS, MANUAL CUTTERS AND TIMMERS, and STAPLERS
ERC warrants to the original purchaser for a period of time from the date of shipment, that its products will be free from defects in material and workmanship when used under normal operating conditions. Warranty stages are:
- ELECTRIC CUTTERS: Three (3) months labor and twelve (12) months limited warranty on parts (excluding wearables)*;
- MANUAL CUTTERS AND TRIMMERS: 15 inches and smaller: Two (2) year repair or replacement coverage (excluding wearables)* ;
- MANUAL CUTTERS AND TRIMMERS: Greater than 15 inches: One (1) year repair or replacement coverage (excluding wearables)* ;
- STAPLERS: One-year repair or replace coverage (excluding wearables).
With the exception of ELECTRIC CUTTERS and MANUAL CUTTERS AND TRIMMERS with a Shipping Weight of 60 lbs. or over, all items are "return to depot" for warranty service. Improper use, cutting blades, and user maintenance requirements are not covered by this warranty. ERC agrees to repair or replace, at its option, any defective part or component covered by this warranty, provided there was no abuse and ERC must first receive written notice of a defect within the applicable warranty period. With the exception of the Labor warranty for ELECTRIC CUTTERS, warranties do not include labor or the payment of any labor charges or incidental or consequential expenses. All parts are shipped FOB Brentwood, NY. Warranty claims must be submitted with replacement part order. *Examples of wearables are: knives, sticks, light bulbs, rubber rollers, belts, feed stones, separator pads, fuses, gears, chains, clutches, brakes, etc.
|
English
| 
Espanol
| 
Francais
| 
Deutsch
| 
Italiano |
