A Touch-Key Pad activated Electric Paper Cutter, the ERC 480EP is a dynamic Heavy-Duty Industrial Paper Cutter designed and built for repetitive cutting cycles. The 480EP can be operated on a Tabletop or Mounted onto the included Steel Base Cabinet. The 480EP Electric Paper Cutter has a Cutting Width of 18.6 inches and will cut through a paper stack up to 2.0 inches high (about 550 sheets) in one stroke. Front/Rear Safety Covers, Motor Driven Paper Clamp, Motor Driven Backstop, Optical Blade Placement Indicator and Blade Stop Photo Eye Safety Circuit are some of the useful features on the 480EP Electric Paper Cutting Machine. Blade to Backstop Depth is 16.5 inches. The Backstop is controlled through a Digital Display and Input Panel, moves in smooth calibrated 1/8-inch increments, extends to the rear edge of the Cutting Surface, and can be locked in position. Information input into the Key Pad can be saved in memory for future cutting jobs. The Cutting Blade and Electric Paper Clamp alignment allow for a Narrow Cut of 1.2 inches. The Work Surface on the 480EP Electric Paper Cutter is a practical 24 x 26 inches. A Safety Feature on this Paper Cutter is that Two-Hand Operation is required for Blade Action. A Base Cabinet for storage is included.
2in. - 550 Sheet Cutting Height Capability
Motor driven Paper Clamp and Back Gauge with smooth Calibrated Movement
Three-way Safety Measures
Transparent Safety Guard
Full Backstop extension
Solid Steel Blade Carrier
Optical Blade Placement Indicator
Safe Two-Handed Operation Required
Comes with a Base Cabinet for Storage WARRANTY FOR ELCTRIC CUTERS, MANUAL CUTTERS AND TIMMERS, and STAPLERS
ERC warrants to the original purchaser for a period of time from the date of shipment, that its products will be free from defects in material and workmanship when used under normal operating conditions. Warranty stages are:
ELECTRIC CUTTERS: Three (3) months labor and twelve (12) months limited warranty on parts (excluding wearables)*;
MANUAL CUTTERS AND TRIMMERS: 15 inches and smaller: Two (2) year repair or replacement coverage (excluding wearables)* ;
MANUAL CUTTERS AND TRIMMERS: Greater than 15 inches: One (1) year repair or replacement coverage (excluding wearables)* ;
STAPLERS: One-year repair or replace coverage (excluding wearables).
With the exception of ELECTRIC CUTTERS and MANUAL CUTTERS AND TRIMMERS with a Shipping Weight of 60 lbs. or over, all items are "return to depot" for warranty service. Improper use, cutting blades, and user maintenance requirements are not covered by this warranty. ERC agrees to repair or replace, at its option, any defective part or component covered by this warranty, provided there was no abuse and ERC must first receive written notice of a defect within the applicable warranty period. With the exception of the Labor warranty for ELECTRIC CUTTERS, warranties do not include labor or the payment of any labor charges or incidental or consequential expenses. All parts are shipped FOB Brentwood, NY. Warranty claims must be submitted with replacement part order. *Examples of wearables are: knives, sticks, light bulbs, rubber rollers, belts, feed stones, separator pads, fuses, gears, chains, clutches, brakes, etc.
GBC, Ibico, Ingento, and Quartet offer warranties against defects in materials and workmanship on certain products. Not all products are covered by warranty. What is covered and the time limitations of the warranties vary by product.
BINDERS and LAMINATORS: GBC and Ibico have a one (1) year warranty.
GBC COVERS, POUCH LAMINATORS, Quartet products such as EASELS are not covered by warranty but under certain circumstances they will be replaced by the manufacturer.
SHREDDERS: Entry level shredders to the 1130 carry a one (1) year warranty with technical service available after you are" Out of Warranty." The 2230 up to the 7000 series SHREDDERS have a three (3) year warranty and a seven (7) year warranty on the cutters.
PUNCHES: Have a one (1) year warranty.
While a product is "In Warranty" parts and labor are covered.
If a product is "Out of Warranty" GBC will refer the customer to a service center.