ERC 650EC 25.5 Inch Cutting Width Electric Paper Cutter with Stand
If you need an Electric Paper Cutter with a 25.5 Inch Cutting Width in a high volume paper cutting environment, the ERC 650EC Electric Paper Cutter is an industrial paper cutter designed especially for you. The ERC 650EC Electric Paper Cutter is a true heavy-duty,work horse. Powerful, affordable and efficient, the ERC 650EC heavy duty paper cutter will cut paper stacks up to 3.1 inches thick, just what you need for those big jobs. Constructed of the best steel components available, the 650EC paper cutting machine has a cutting width of 25.5 inches and at maximum cut height will slice through 700 sheets in a single stroke with 0.1mm accuracy. Blade to backstop depth is 26 inches fully extended to the rear edge of cutting surface. The backstop is motor driven and electronically controlled by the optical input and control screen. Up to 20 pre-set cut size and backstop position programs can be stored . The motor driven paper clamp is a "double clamp" system with adjustable pressure. The cutting blade and paper clamp alignment allow for a narrow cut of 1.25 inches. The work surface on the 650EC electric paper cutter is 26 X 24 inches. Standard Safety Feature on all ERC Paper Cutters require two-hand operation.A useful Base Cabinet with storage is included.
WARRANTY FOR ELCTRIC CUTERS, MANUAL CUTTERS AND TIMMERS, and STAPLERS
- Included in the Price is On-Site Unpacking and
- Setup of the Paper Cutter
- Motor driven paper clamp and backstop
- 26"x 24" work surface
- Stores 20 pre-programmed cut size and backstop positions
- Solid steel blade carrier
- 3.1"/700 sheet cutting capability
- 25.5" wide cut capability
- Full backstop extension
- Double clamp system with adjustable pressure capabilities
- Optical input and LCD control screen
- SafeTwo-Handed Operation
- Comes with a Base Cabinet for convenient storage
ERC warrants to the original purchaser for a period of time from the date of shipment, that its products will be free from defects in material and workmanship when used under normal operating conditions. Warranty stages are:
- ELECTRIC CUTTERS: Three (3) months labor and twelve (12) months limited warranty on parts (excluding wearables)*;
- MANUAL CUTTERS AND TRIMMERS: 15 inches and smaller: Two (2) year repair or replacement coverage (excluding wearables)* ;
- MANUAL CUTTERS AND TRIMMERS: Greater than 15 inches: One (1) year repair or replacement coverage (excluding wearables)* ;
- STAPLERS: One-year repair or replace coverage (excluding wearables).
With the exception of ELECTRIC CUTTERS and MANUAL CUTTERS AND TRIMMERS with a Shipping Weight of 60 lbs. or over, all items are "return to depot" for warranty service. Improper use, cutting blades, and user maintenance requirements are not covered by this warranty. ERC agrees to repair or replace, at its option, any defective part or component covered by this warranty, provided there was no abuse and ERC must first receive written notice of a defect within the applicable warranty period. With the exception of the Labor warranty for ELECTRIC CUTTERS, warranties do not include labor or the payment of any labor charges or incidental or consequential expenses. All parts are shipped FOB Brentwood, NY. Warranty claims must be submitted with replacement part order. *Examples of wearables are: knives, sticks, light bulbs, rubber rollers, belts, feed stones, separator pads, fuses, gears, chains, clutches, brakes, etc.