ERC 6508D 25.6 inch Electric Paper Cutting Machine
An economical and practical Electric Paper Cutter, the ERC 6508D Electric Paper Cutter easily fits into your budget and provides the performance that you want. Designed and built to cut accurately, the ERC 6508D Electric Paper Cutter has a Cutting Width of 25.6 inches and will cut through a stack of paper 3 inches thick (about 500 sheets) in one stroke. Blade to Backstop Depth is 25.6 inches. Some of the Operational features on the ERC 6508D include an Optical Blade Placement Indicator, Safety Cutting Shield and an Easy-to-Read Digital Display to set and register Backstop position and movement. The Backstop is manually controlled, extends to the rear edge of Cutting Surface and advances smoothly and accurately in 1/8-inch increments, It can also be locked in position. Work Surface on the ERC 6508D Electric Paper Cutter is a useable 25 X 10 inches. Blade Action requires two-hand operation - a beneficial safety feature. The Cutting Blade and Electric Paper Clamp alignment allow for a Narrow Cut of 1.2 inches.
PRODUCT FEATURES:
Included in the Price is On-Site Unpacking and Setup of the Paper Cutter
Electric Blade, Clamp and Back Gauge Drive
Electric Motor driven Paper Clamp, which allows cuts a small as 1.2??????????????
Safe Two-Handed Operation
Optical Blade Placement Indicator
Transparent Safety Guard
Full Backstop Extension
Solid Steel Blade Carrier
Precise Digitally Controlled Back Stop
500 sheet or 3?????????????? cutting capacity.
SPECIFICATIONS:
| Product Width: |
37.4in. |
| Product Height: |
45.27in. |
| Product Length: |
41.3 in. |
| Product Weight: |
704 lbs. |
| Voltage: |
220 |
WARRANTY FOR ELCTRIC CUTERS, MANUAL CUTTERS AND TIMMERS, and STAPLERS
ERC warrants to the original purchaser for a period of time from the date of shipment, that its products will be free from defects in material and workmanship when used under normal operating conditions. Warranty stages are:
- ELECTRIC CUTTERS: Three (3) months labor and twelve (12) months limited warranty on parts (excluding wearables)*;
- MANUAL CUTTERS AND TRIMMERS: 15 inches and smaller: Two (2) year repair or replacement coverage (excluding wearables)* ;
- MANUAL CUTTERS AND TRIMMERS: Greater than 15 inches: One (1) year repair or replacement coverage (excluding wearables)* ;
- STAPLERS: One-year repair or replace coverage (excluding wearables).
With the exception of ELECTRIC CUTTERS and MANUAL CUTTERS AND TRIMMERS with a Shipping Weight of 60 lbs. or over, all items are "return to depot" for warranty service. Improper use, cutting blades, and user maintenance requirements are not covered by this warranty. ERC agrees to repair or replace, at its option, any defective part or component covered by this warranty, provided there was no abuse and ERC must first receive written notice of a defect within the applicable warranty period. With the exception of the Labor warranty for ELECTRIC CUTTERS, warranties do not include labor or the payment of any labor charges or incidental or consequential expenses. All parts are shipped FOB Brentwood, NY. Warranty claims must be submitted with replacement part order. *Examples of wearables are: knives, sticks, light bulbs, rubber rollers, belts, feed stones, separator pads, fuses, gears, chains, clutches, brakes, etc.
|
English
| 
Espanol
| 
Francais
| 
Deutsch
| 
Italiano |
