Lassco Spinnit FMMSP-3 Three Spindle Pneumatic Lift Paper Drill The most versatile, compact, and affordable fully automatic 3 spindle drill on the market today2 inch drilling capacityAdjustable pneumatic lift with foot pedal activationPowered by your in-house air or with our select compact compressor (compressor sold separately)
The Lassco Spinnit FMMSP-3 Paper Drill is the deluxe version of the FMM-3 with both pneumatic operation and Stationary Drill Heads set for drilling three holes 4 -1/4 inch center to center. The Lassco Spinnit FMMSP-3 Paper Drill has a 2 inch drilling capacity. It also has 6 stop collars for precise drilling. The Lassco Spinnit FMMSP-3 Paper Drill comes equipped with a traversing table that provides the user with a versatile production Paper Drill at an affordable price. The Lassco Spinnit FMMSP-3 Paper Drill can handle paper sizes up to 15 x 32 inches.
Table size: 15 x 32 inchesBase footprint: 15 x 15 inchesTable height: 35-1/2 inchesOverall height: 52 inchesOverall width: 32 inchesOverall depth: 26 inchesMotor: 3/4 HP, 115 VoltsRecommended pneumatic requirements are: 3.1 CFM at 100 PSI (machine operates at 80 PSI)Actual weight: 173 lbs.Shipping weight: 270 lbs.Shipping dimensions: 48 x 40 60 inchesShips via: LTL Truck
All floor model drills include:
MS-1 drill sharpenerSpin-Eze drill bit lubricantSet of 5/16 inch drill bitsSharpening stoneChip clearer
Drill stripsStyle A 2 inch capacity hollow drill bit
Some Pointers and Tips on Drilling: USE A SHARP DRILL BIT AT ALL TIMES. Generally, a drill bit can be used for approximately four (4) hours of use before it needs to be sharpened. Apply light pressure when sharpening. Too much pressure may cause flaring of the tip which renders the bit unusable. Sharpening stones are also recommended to debur the outside cutting edge of the your drill bits for better performance. Use of Drill-Ease or Spin-Eze lubricant is required. Finally, purchase drill blocks to stop the drill bit after it penetrates the drilled material.