Lassco MS-1 Manual Paper Drill Bit Sharpener For use with Style A and L hollow drill bitsPrecision sharpener with a self-seating, lathe type construction on a heavy-duty baseConstructed with a solid caride cutting head for a long sharpening life
The MS-1 Manual Precision Drill Sharpener is a precision Drill Sharpener with self-seating, lathe type construction on a heavy duty base. This Drill Sharpener accepts Style A and Style L Drill Bits. It comes with suction feet for stability (these can be removed and the sharpener can be mounted.). The MS-1 Drill Sharpener is constructed with a solid carbide cutting head.
Actual weight: 2 lbsShiping weight: 2 lbs.Ships via: UPS
Some Pointers and Tips on Paper Drilling:
USE A SHARP DRILL BIT AT ALL TIMES! Generally, a Drill Bit can be used for approximately four (4) hours of use before it needs to be sharpened. Apply light pressure when sharpening. Too much pressure may cause flaring of the tip which renders the Bit unusable. Drill Sharpeners are available and are recommended with purchase along with an extra drill bit. Sharpening stones are also recommended to debur the outside cutting edge of the drill bits for better performance. Use of Drill-Ease or Spin-Eze lubricant is required. Finally, purchase drill blocks to stop the drill bit after it penetrates the drilled material.