Staplex SU-100 ULTRA Heavy Capacity Electric Stapler
Staplex Model SU-100 Ultra Heavy Capacity Electric Stapler makes heavy duty table-top binding affordable to everyone! 500% faster than any other way to staple or bind! Saves time, money and effort! Solid state electronics, direct-drive solenoid, durable cast aluminum housing and all steel staple mechanism are designed for rugged use- day after day, year after year!
Model SU-100 eliminates fatigued hands caused by conventional manual staplers!
Great for all heavy capacity stapling- in office, printshop and reprographics areas, packaging and shipping department. Staple paper, corrugated, plastic, cardboard, cloth or virtually anything!
USe Model SU-100 for reports , documents, computer and laser printouts, bookies form pads, coupon and checkbooks, legal, tax and accounting documents and much , much more! Wide opening, dual adjustable backstopsand electronic footswitch assure fast, accurate, neat staple positioning. Put a Staplex SU-100 to work for you today! Satisfaction guaranteed!
Staplex Model SU-100 Ultra is generally recommended for stapling 20+ sheets of 20 lb. paper. Model SU-100 requires that the proper size staple be used for each stapling job based on the number of sheets of paper being stapled as noted below. In other words, you cannot use the HO-5/8 5/8" staple to staple 25 sheets as of 20 lb. paper because the staple leg length would be to long for that job. Right lag of staple should n\ be a minimum of 1.25 inches (3.2 cm) from right edge of material to activate safety microswitch attatched to the adjustable lockimng backstop on the right side of the stapling head. Optional additional left side contact safety microswitch available on special order ( to allow positioning right leg of the staple closer than 1.25 inches from the right edge of the material.)
Staple up to 100 sheets of 20-lb. (75 g/m2) paper or equivalent at tap of electronic footswitch!
Re-loads in seconds with 4 sizes of staples .25 inch, .375 inch, .5 inch, and .625 inch
"Hi-Low" switch to adjust stapling impact delivers the right stapling power every job
Portable, no mounting, sets on desk, table, bench
Direct-drive solenoid for tight, positive clinch
Dual adjustable locking backstop to 4 inches (10.2 cm) depth for super neat stapling!
Jam-proof all steel staple mechanism
Staple paper, corrugated, plastic, cardboard, cloth and more!
Made in U.S.A.
Uses Staplex Type HO-1/4, HO-3/8, HO-1/2 and HO-5/8 High Speed Staples. (See below for capacities.)
Completely portable. No mounting required.
Model SU-100: Ultra Heavy Capacity Electric Stapler 110-125 volts, 50-60 Hz AC
Model SU-100A: same as above for 220-330 volts, 50-60 Hz AC
Staplex High Speed Staples for Model SU-100 (1,000 per box):
Type HO-1/4 .25 inch High Speed Staples (up to 20 sheets)
Type HO-3/8 .625 inch High Speed Staples (20 to 50 sheets)
Type HO-1/2 .5 inch High Speed Staples (50 to 80 sheets)
Type HO-5/8 .625 inch High Speed Staples (80 to 100 sheets)
Notes: Right leg of staple should be minimum of 1.25 inches (3.2 cm) from right edge of material to activate safety microswitch attached to the adjustable locking backstop on the right side of the stapling head.
Optional left side contact safety microswitch available on special order (to allow positioning right leg of staple closer than 1.25 inches from the right edge of material.)
Weight :22 lbs. (10 kg)
Dimensions: 10.5 inches wide, 10.25 inches deep, 10 inches high (26.7 cm x 26 cm x 25.4 cm).