Lassco Spinnit FMP-2 Single Spindle Pneumatic Paper Drill FMP-2Single spindle drill2 inch drilling capacityHands-free, low maintenance, and efficient operationProvides maximum production at an affordable priceLowest cost floor model drill on the market
The Lassco Spinnit FMP-2 Floor Model Paper Drill is the pneumatic version of the FM-2 Paper Drill. The FMP-2 Paper Drill is identical to the FM-2 Paper Drill except it is pneumatically and thereby automatically powered. Pneumatic Paper Drills work with the assistance of air pressure. The Spinnit pneumatic powered Paper Drill provides continuous drilling by foot pedal control. The FMP-2 Paper Drill is pneumatically powered by your in-house air or with our Lassco compact air compressor (sold separately). The Lassco Spinnit FMP-2 single spindle paper drill has a 2-inch drilling capacity and a rugged mechanical lift table that smoothly traverses in either direction. The Spinnit FMP-2 is ideal for hospitals, law and accounting offices where it can be used for drilling holes in files and records that use hole fasteners. Lassco Paper Drills are built for ease in operation and maximum production performance.
Table size: 15 x 32 inchesBase footprint: 15 x 15 inchesTable height: 35-1/2 inchesOverall height: 54 inchesOverall width: 32 inchesOverall depth: 26 inches,li>Motor: 1/4 HP, 115 voltsActual weight: 150 lbsShipping weight: 260 lbsShipping dimensions: 48 x 40 x 60Ships via: LTL Truck
AccessoriesDrill stripsStyle A 2 inch hollow drill bits
All floor model drills include:
MS-1 drill sharpener
Spin-Eze drill bit lubricant
Set of 5/16 inch drill bits
Some Pointers and Tips on Drilling: USE A SHARP DRILL BIT AT ALL TIMES. Generally, a drill bit can be used for approximately four (4) hours of use before it needs to be sharpened. Apply light pressure when sharpening. Too much pressure may cause flaring of the tip which renders the bit unusable. Sharpening stones are also recommended to debur the outside cutting edge of the your drill bits for better performance. Use of Drill-Ease or Spin-Eze lubricant is required. Finally, purchase drill blocks to stop the drill bit after it penetrates the drilled material.