Lassco Spinnit FM-2 Manual Lift Paper DrillMS-1 drill sharpenerSpin-Eze drill bit lubricantSet of 5/16 inch drill bitsSharpening stoneChip clearer
The Lassco Spinnit FM-2 Paper Drill is a single spindle Paper Drill that provides maximum production at an affordable price. It has a 2 inch drilling capacity and comes with a mechanical lift table that traverses right and left. Foot pedal control allows for hands to be free. The FM-2 is the lowest cost floor model Paper Drill on the market. It requires low maintenance and operates efficiently. The Lassco Spinnit FM-2 Paper Drill is also available in pneumatic powered version (Model FMP-2).
All floor model drills include:
Table size: 15" x 32"Base footprint: 15" x 15"Table height: 35-1/2"Overall height: 54"Overall width: 32"Overall depth: 26"Motor: 1/4 HP, 115 VoltsActual weight: 150 lbs
Dimensions: 48 L. x 40 W. x 60 H. Inches. Weight: 260 lbs. Ships on a Pallet by Truck.
Some Pointers and Tips on Drilling: USE A SHARP DRILL BIT AT ALL TIMES. Generally, a drill bit can be used for approximately four (4) hours of use before it needs to be sharpened. Apply light pressure when sharpening. Too much pressure may cause flaring of the tip which renders the bit unusable. Use of Drill-Ease or Spin-Eze lubricant is required. Finally, purchase drill blocks to stop the drill bit after it penetrates the drilled material.