Lassco Spinnit FMM-3 Three Spindle Manual Lift Paper DrillMS-1 drill sharpenerSharpening stoneSpin-Eze drill bit lubricantChip clearerSet of 5/16 inch drill bits.
The FMM-3 Manual Lift Paper Drill is the lowest priced 3 spindle drill on the market. The Lassco Spinnit FMM-3 paper drill is a 3-Spindle Paper Drill that offers a 2 inch drilling capacity, easy movable head design and a rugged mechanical lift table that smoothly traverses in either direction. The FMM-3 paper drill is built for ease in operation and maximum production performance.
All floor model drills include:
Table size: 15" x 32"Base footprint: 15" x 15"Table height: 35-1/2"Overall height: 52"Overall width: 32"Overall depth: 26"Max drilling capacity: 2"Motor: 3/4 HP, 115 VoltsActual weight: 195 lbs.Shipping weight: 292 lbsShipping dimensions: 48" x 40" x 60"Ships via: LTL Truck
Some Pointers and Tips on Drilling: USE A SHARP DRILL BIT AT ALL TIMES. Generally, a drill bit can be used for approximately four (4) hours of use before it needs to be sharpened. Apply light pressure when sharpening. Too much pressure may cause flaring of the tip which renders the bit unusable. Sharpening stones are also recommended to debur the outside cutting edge of the your drill bits for better performance. Use of Drill-Ease or Spin-Eze lubricant is required. Finally, purchase drill blocks to stop the drill bit after it penetrates the drilled material.
AccessoriesDrill stripsStyle A 2" hollow drill bits