Call 866-432-0042 We Will Match Any Current Web Advertised Price!

Martin Yale - WSA71600 - Martin Yale Style A 2 1/4" Hollow Drill Bit - 7/16"

Martin Yale - WSA71600 - Martin Yale Style A  2 1/4" Hollow Drill Bit - 7/16"
PRODUCT ID#
ID : 15843
AVAILABILITY
NEW FACTORY DIRECT
MSRP
$29.00
INSTANT SAVING
-$1.50
YOU PAY ONLY
$27.50
GOVERNMENT/SCHOOL BUYERS/NOT-FOR-PROFITS
CALL FOR SPECIAL PRICING
Martin Yale Style A 2 1/4" Drill Bit - 7/16" (WSA71600)

Style A 2 1/4" Hollow Drill Bit with a 7/16" diameter by Martin Yale is a Hollow Paper Drill Bit with a 2" paper drilling capacity and a 7/16" diameter size for use with Super Speed, Casco, Challenge, Climax, and Ottawa Paper Drills. Style A 2 1/4" Hollow Drill Bits also are available in 3/8", 1/8, 1/4, 5/16", 3/16" and 1/2" diameter sizes.

An assortment of Paper Drill Bits in various styles and diameters is also available: Style A - 2-1/2" Drill Bits, diameter sizes, 1/4", 3/8", 5/16".
Style B - 2-1/4" Drill Bit, diameter sizes - 1/4 and 3/16.
Style B SPECIAL Drill Bits, diameter sizes 1/4" and 5/16".
Style C 2 1/4" Drill Bit, diameter sizes 1/4 and 5/16".
Style D 2" Drill Bit, diameter sizes - 1/4", 5/16", 3/8.
Style K - 2" Drill Bit, diameter sizes - 1/4", 1/8, 5/16", 3/8"and 1/2", also Style K - 2" Diamonized Drill Bit - sizes 1/8", 1/4", 5/16", 3/8", 1/2".
Style J 1" Hollow Drill Bits, diameter sizes - 5/32", 1/4" and 9/32". Style J 1" Diamonized Hollow Drill Bits, diameter sizes - 5/32", 1/4" and 9/32.


Some Pointers and Tips on Drilling: USE A SHARP DRILL BIT AT ALL TIMES. Generally, a Drill Bit can be used for approximately four (4) hours of use before it needs to be sharpened. Apply light pressure when sharpening. Too much pressure may cause flaring of the tip which renders the Bit unusable. Drill Sharpeners are available and are recommended with purchase along with an extra drill bit.

Keep Paper Drill bits clean. Clogging is a cause of broken bits. This commonly occurs when drilling through books bound with glue. Cleaning the interior surface of the bit after a shift change or break will ensure the Bit does not snap. Be sure to clean out bits after each use, and when not in use Bit can be lightly oiled to prevent rust and corrosion.

Sharpening stones are also recommended to debur the outside cutting edge of the drill bits for better performance. Finally purchase drill blocks to stop the drill bit after it penetrates the drilled material.
  • Product Length: 3.00 in.
  • Product Width: 1.00 in.
  • Product Height: 2.00 in.
  • Product Weight: 1.00 lbs.
All Laminex Roll Laminators and die cutters are warranted to the original purchaser against defects in materials and workmanship for a period of one (1) year from the date of purchase when used under normal operating conditions. Laminex Pouch Laminators are warranted with the same conditions except for a period of five (5) years.